rsa6.1en diodes rev.c 1/2 esd protection diode rsa6.1en z application z external dimensions (unit : mm) z lead size figure (unit : mm) esd protection umd5 0.35 0.9 1.6 0.650.65 z features 1) small mold type. (umd5) 2) high reliability. z construction silicon epitaxial planar z structure rohm : umd5 jeita : sc-88a jedec : sot-353 dot (year week factory) 2.00.2 2.10.1 1.250.1 0.25 0.1 0.05 `?? ? (5) (4) 1.30.1 0.65 0.65 (1) (3) (2) 0.150.05 0.9 1 0. 0.7 0.1min 00.1 each lead has same dimension z taping dimensions (unit : mm) 2.250.1 0 4.00.1 4.00.1 2.00.05 1.550.1 0 3.50.05 1.750.1 8.00.2 1.10.1 2.450.1 1.150.1 2.40.1 0.30.1 2.40.1 00.5 5.50.2 z absolute maximum ratings (ta=25 c) symbol unit pm peak pulse power-1(tp=101000us) p pk w peak pulse power-2(tp=820us) p pk w tj tstg storage temperature -55 to +150 30 200 junction temperature 150 parameter limits power dissipation 200 w z electrical characteristics (ta=25 c) symbol min. typ. max. unit zener voltage v z 6.1 - 7.20 v i z =1ma reverse current i r --1.0a v r =3.0v forward voltage v f - - 1.25 v i f =200ma capacitance between terminals c t -90-pf f=1mhz,v r =0v parameter conditions
rsa6.1en diodes rev.c 2/2 z electrical characteristic curves (ta=25 c) reverse voltagevr(v) vr-ir characteristics reverse current:ir (na) reverse current:ir(na) ir disresion map capacitance between terminals:ct(pf) reverse voltage:vr(v) vr-ct characteristics ct disresion map capacitance betweenterminals:ct(pf) z ener current:iz(ma) zener voltage:vz(v) vz-iz characteristics dynamic impedance:zz() zener current(ma) zz-iz characteristics vz disresion map zener voltage:vz() 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000 00.511.522.53 ta=25 ta=-25 ta=75 ta=125 ta=150 0 0.02 0.04 0.06 0.08 0.1 0.12 0.14 0.16 0.18 0.2 ta=25 vr=3v n=30pcs ave:0.0190na 1 10 100 1000 00.511.522.53 f=1mhz 50 60 70 80 90 100 110 120 130 140 150 ave:99.8pf ta=25 f=1mhz vr=0v n=10pcs 0.001 0.1 1 10 6 6.5 7 7.5 8 0.01 ta=75 ta=-25 ta=125 ta=25 ta=150 1 10 100 0.1 1 10 6.7 6.8 6.9 7 7.1 7.2 ave:6.891v ta=25 iz=1ma n=30pcs time:t(s) rth-t characteristics transient thaermal impedance:rth (/w) 1 10 100 1000 0.001 0.01 0.1 1 10 100 1000 rth(j-a) rth(j-c) 1ms im=10ma if=100ma 300us time mounted on epoxy board
appendix appendix1-rev1.1 the products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. notes no technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of rohm co.,ltd. the contents described herein are subject to change without notice. the specifications for the product described in this document are for reference only. upon actual use, therefore, please request that specifications to be separately delivered. application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. rohm co.,ltd. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by rohm co., ltd. is granted to any such buyer. products listed in this document are no antiradiation design. about export control order in japan products described herein are the objects of controlled goods in annex 1 (item 16) of export trade control order in japan. in case of export from japan, please confirm if it applies to "objective" criteria or an "informed" (by miti clause) on the basis of "catch all controls for non-proliferation of weapons of mass destruction.
|
